High efficiency FRP pultrusion machine Production line rebar pultrusion machine
Basic Info
Model No.: FRP pultrusion machine
Product Description
FRP rebar pultrusion machine
This line mainly consists of yarn support, dipping glue slot, winding, dry oven, haul-off machine, cutting saw and tilt tipping device.
Yarn support: used to place the yarn spool, adopts the welding structure of steel plate, steel pipe and angle iron.
Dipping glue slot: welded by stainless steel material, there is press roller inside to make the roving dip in the resin sufficiently.
Winding device: adopts gear wheel to drive the roller turn around the products, and wind the thread. This device adopts frequency conversion speed-regulated mode, adjust the rotate speed stepless.
Dry oven: adopts cast aluminium heater, intelligent temperature controller to control the temperature. The heating box adopts mesh structure and it is easy to open it and clean the dropping resin, filled with insulation materials inside.
Technical parameter:
Working voltage | 380V/50HZ | Air pressure | 0.4-0.6Mpa |
General power | 30Kw | Center height | 1000mm |
Number of winding heads | 2 | Winding diameter | Max. 26mm |
Winding rotation speed | 9-95rpm | Traction force | Max. 40Kn |
Traction speed | 0.1-1m/min | Clamping width | 500mm |
Clamping length | 1200mm | Cutting speed | 2850rpm |
Cutting range | (W*H) 500*85mm | Length setting mode | Limiting switch |
Cutting journey | 700mm | Dimension | 22000*1850* 1450mm |
Packaging Details:plastic film at first, then good fixed in container. Or by clients' requirement.
Delivery Time:Shipped in 20-35 days after payment.
payment:T/T
This machine can products many products according to different moulds
If you are interested in our product,pls feel free contact me!Thanks.
Product Categories : Frp Production Line > FRP Rebar Machine
Premium Related Products
