Fiberglass FRP Rebar machine/Concrete plastic Rebar FRP Rebar
Basic Info
Model No.: FRP rebar machine
Product Description
We offers a full line of Fusion Bond Epoxy Application Equipment including shot blasting machine,electrostatic spray systems,dust collectors,vacuum loading systems, powder shrouds, fire suppression equipment, shaker separators, furnaces, air dryers, and cooling towers.
Advantage and Statement
• Excellent Corrosion Protection.
• More than 10 Years of Experience.
• Extended Service Life.
• Cost Effective Life-Cycle.
• Nationwide Availability.
• Sustainable.
• Coated with epoxy resin
• Trustworthy brand
• ASTM-A615;A775
• Dia:6-40mm
Fusion Bonded Epoxy Coated Rebar Manufacturing Process
The application of fusion-bonded epoxy coating to steel reinforcement involves four major process steps:
1. Surface Preparation
Reinforcing bars are blast-cleaned to a near white metal finish using abrasive grit. This cleans the steel of contaminants, mill scale and rust. It also roughens the surface to give it a textured anchor profile. During this process, salt contamination is also removed.
2. Heating
Bars are heated to approximately 450°F, typically using electrical induction heaters, although gas-fired heating is used in some cases.
3. Powder Application
The heated steel is passed through a powder-spray booth where the dry epoxy powder is emitted from a number of spray nozzles. As the powder leaves the spray gun, an electrical charge is imparted to the particles. These electrically charged particles are attracted to the grounded-steel surface providing even coating coverage. When the dry powder hits the hot steel, it melts and flows into the anchor profile (i.e., the microscopic peaks and the valleys on the surface) and conforms to the ribs and deformations of the bar. The heat also initiates a chemical reaction that causes the powder molecules to form complex cross-linked polymers which give the material its beneficial properties.
4. Cure
Following powder application, the coating is allowed to cure for a short period (approximately 30 seconds) during which time it hardens to a solid. In some plants, the curing is often followed by an air or water quench that quickly reduces the bar temperature to facilitate handling.
Technical parameter:
Working voltage | 380V/50HZ | Air pressure | 0.4-0.6Mpa |
General power | 30Kw | Center height | 1000mm |
Number of winding heads | 2 | Winding diameter | Max. 26mm |
Winding rotation speed | 9-95rpm | Traction force | Max. 40Kn |
Traction speed | 0.1-1m/min | Clamping width | 500mm |
Clamping length | 1200mm | Cutting speed | 2850rpm |
Cutting range | (W*H) 500*85mm | Length setting mode | Limiting switch |
Cutting journey | 700mm | Dimension | 22000*1850* 1450mm |

Beijing ZLRC is Chinese Fiberglass Reinforced Plastic (FRP) machines and FRP products and Other Plastic Products manufacturer and fabricator for various industrial and systems for various countries. Beijing ZLRC provides the best FRP services and offerings in the fiberglass reinforced plastic industry for customers in home and abroad. Beijing ZLRC consists of teams of experienced work force to provide a wide range of FRP products, composite engineering works, services and products in order to satisfy and meet the requirement of customers.
Our factory located in the base of FRP Zaoqing town, Hengshui city Hebei province and we in FRP filed more then ten years. Our machines and FRP products customzied by customers requirements.
Our main products are: FRP Tank winding machine, FRP pipe winding machine, FRP Grating Machine, FRP Pultrusion Machine, FRP Grating, FRP pipe, FRP tank, FRP water tank, FRP profiles, FRP wind-proof and dust suppressing wall, FRP cooling tower and accessoires, FRP fan, FRP raw material, HVAC systems and Hdpe Pipe ect.
We insist on "First Quality, First Trust, and First Service" as our business philosophy, focuses on international and domestic markets, strives for excellence. We are sincerely expecting to cooperate with you and win-win, warmly welcome to visit our company; Let's create bright future together.
We supply complete solutions and services including:
Design and manufacture
Installation and contraction
Guide and training
Know-how and technical support
We Can produce it according to the customer's requirements.
We also supply Moulds according to your drawing.
Packaging Details:plastic film at first, then good fixed in container. Or by clients' requirement.
Delivery Time:Shipped in 20-35 days after payment.
Q: Are you trading company or manufacturer ?
A: Our factory is one of the biggest FRP products, FRP machines manufacturer in China.
Q: How about after-sales service ?
A: 1 year free warranty, Lifetime technical service support.
Q: How can I install the production line and get a commissioning ?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.
Q: What is your terms of payment ?
A: Normally,50% as the deposit first by T/T, the rest 50% will be paid before shipping by T/T.
Product Categories : Frp Production Line > FRP Rebar Machine
Premium Related Products