1. Product introduction
E-glass surface mat is produced with E-glass fiber under wet papermaking process, it is designed for use in filament winding process for manufacture of GRP pipe, storage tank etc, or in hand lay-up process for improving GRP surface.Applicable for filament winding, hand lay-up and compression molding process, etc.
2. Product feature
1. Uniform fiber distribution, even thickness
2. Smooth and soft surface
3. Low binder content
4. Fast resin impregnation
5. Good flexibility and mould obedience
6. Strong intensity and impact resistance
7. Good covering of the texture of under layers
8. Good corrosion resistance, water-proof and inflaming retarding
3. Product classfication
1)Fiberglass Tissue Mat for roofing
2)Fiberglass Tissue Mat for flooring
3)Fiberglass Tissue Mat for pipe wrapping
4)Fiberglass Tissue Mat for FRP surface
5)Fiberglass Tissue Mat for wall covering
Each Surface Tissue is wound onto a paper tube which has an inside diameter of 76mm and the mat roll has a diameter of 330mm. The mat roll is wrapped up with plastic film,and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a cantainer directly or on pallets.
Unless otherwise specified, Chopped Strand Mat should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15ºC~35ºC and 50%~75% respectively.