Automatic 8 Cavity Bottle Blowing Machine 8000BPH
Product Description
Automatic 8 Cavity Bottle Blowing Machine 8000BPH
Technique Parameter of blow molding machine:
| Main part: | ||||
| Pneumatic part | Valve | SMC | ||
| Cylinder | ||||
| Electric part | PLC | SIEMENS | ||
| Operating system | SIEMENS | |||
| Relay | OMRON Japan | |||
| Infrared thermometer | SCHNEIDER | |||
| Note | All of the electrical components adopts CE, UL, CCC approved international advanced high-tech product. | |||
| Main parameter: | ||||
| Model | BX-A8 | |||
| Productivity | Depend on bottle design | 9000-10000PCS/H | ||
| Product type | Body diameter | ≤90mm | ||
| Height | ≤325mm | |||
| Neck diameter | 28mm-30mm | |||
| Mold | Cavity | 8 cavities | ||
| Mold thick | 240mm | |||
| Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ | ||
| Rated Power | 66kw | |||
| Really use power | 28kw | |||
| Air source | LP air compressor | 3.0m3/min 1.0MPa | ||
| HP air compressor | 3.2m3/min 3.0MPa x3 | |||
| Air dryer | 10.0m3/min 3.0MPa | |||
| Cooling water | Cooling water | 60L/min | ||
| Machine Size | L*W*H | 5500*4000*2200mm | ||
| Weight | 5800kg | |||
| Auxiliary equipment (preform unscramble) | L*W*H | 2300*1500*2480mm | ||
| Weight | 350kg | |||
| Resin available | / | PET | ||
HP air compressor:
| Air compressor | Unit | 3.2M3/30KG |
| Volume | M3 | 3.2 |
| Pressure | Kg | 30 |
| Speed | r/min | 850 |
| Power | KW | 2×18.5 |
| Overall Dimension | mm | 2350×1100×1650 |
| Weight | kg | 1150 |
LP air compressor:
| Air compressor | Unit | 3.0M3/10KG |
| Volume | M3 | 3.0 |
| Pressure | Kg | 10 |
| Power | KW | 22 |
| Overall Dimension | mm | 2100*1100*1900 |
| Weight | kg | 850 |
Mold Chiller:
| Model | 05WCI | |
| 4.4/38℃ Cooling capacity(Kcal/h) | 9175 | |
| Compressor | All-closed vorticity | |
| Compressor power (KW) | 4.4 | |
| Refrigerant | R22 | |
| Chilled water pump power(KW) | 0.75 | |
| 10℃ Max. flow rate of chilled water(L/min) | 120 | |
| Flow water inlet and outlet pipe | 1`` | |
| Condensing water rate L/min | ≥60 | |
| Chilled water inlet and outlet pipe | 1`` | |
| Exterior dimension | Length(mm) | 1200 |
| Width(mm) | 580 | |
| Height(mm) | 1180 | |
| Water tank capacity | L | 55 |
| Weight | Kg | 176 |
Air Cooling Drier:
| Refrigeration Air Dryer | Unit | 10.0M3/min 3.0MPa |
| Flow capacity | Nm3/min | 10.0 |
| W.P | MPa | 3.0 |
| Inlet Temp. | ℃ | ≤80 |
| Dew point | ℃ | 23 |
| Ambient Temp. | ℃ | ≤38 |
| Power supply | V/HZ | 220/50 |
| Compressor power | Kw | 3.0 |
| Cold Medium | / | R22 |
| Overall Dimension | mm | 1550×850×1650 |
| Weight | Kg | 400 |
Air Filter:
| Refining-Filter | Unit | 3.5N M3/30Kg |
| Flow Capacity | NM3/Min | 3.5 |
| Max. work pressure | MPa | 3.0 |
| Inlet Temp. | ℃ | ≤50 |
Air Storage Tank:
| Air storage tank | Unit | 1.0M3/3.0MPa |
| Volume | M3 | 1.0 |
| Pressure designed | MPa | 3.0 |
| Temp. designed | ℃ | 100 |
| Work pressure | MPa | 3.0 |
| Test pressure | MPa | 4.13 |
| Weight | Kg | 505 |
| Overall Dimension | mm | 1200*1100*2650 |
This automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, wide-mouth bottle etc.
* Stable performance with advanced PLC.
* Conveying preforms automatically with conveyor.
* Strong penetrability and swift distribution of the heater by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
* Strong clamping force with high pressure and double crank links to lock the mold.
* Low cost, high efficiency, easy operation, easy maintenance, with automatic technological process.
* Ideal effect of the chilling with the chilling system.
* Easy installation and starting
* Low rejection rate: less than 0.2 percent.
Related product: Small Bottle Filling Machine, Bottle water filling machine
Packaging and Shipping
Certificate
FAQ
Q: How about the spare parts?
A: We will send one year enough easy broken spare parts together with the machines, shipping together. During the warranty time, we will supply the spare parts with our cost including the delivery fees.
Q: How long time for installation?
A: According your machines order, we will send one or two engineers to your plant, it will take about 10 days to 25 days.
Q: How to install my machines when it arrives? How much the cost?
A: We will send our engineers to your factory to install the machines and train your staff how to operate the machines. Customer pay air tickets go and back accommodation and USD80/day/person.
Q: When can I get my machine after I paid?
A: Normally production time is around 30-60days, the exactly depend on what kind of machine you order. The shipping time is based on your destination port.
Q: What`s your guarantee or warranty of the quality if buy your machines?
A: We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q: Are you a trading company or a manufacturer?
A:We are an original equipment manufacturer so that we can provide you high quality machines in reasonable price. Welcome to visit us.
Product Categories : Bottle Blow Molding Machine